FN M249 Trigger Mechanism

Buy FN M249 Trigger Mechanism Online

The FN M249 is a light machine gun (LMG) designed by FN Herstal and used by many military forces around the world. Its trigger mechanism is a critical component of the weapon, enabling controlled and reliable firing. The M249’s trigger mechanism is a selective fire system, meaning it can switch between different firing modes: semi-automatic and fully automatic, Buy FN M249 Trigger Mechanism Online.

Here’s a breakdown of the FN M249’s trigger mechanism:

1. Fire Selector

• The FN M249 uses a fire selector switch, typically located on the left side of the receiver. This selector allows the user to choose between semi-automatic (single shot per trigger pull) and fully automatic (continuous firing as long as the trigger is held down) modes.
• The fire selector has three positions:
  • S (Safe): Prevents firing.
  • 1 (Semi-automatic): Fires one round per trigger pull.
  • A (Automatic): Fires continuously while the trigger is pressed.

2. Trigger Group

• The trigger group consists of several components: the trigger itself, the sear, disconnector, and hammer. These work together to control the firing mechanism based on the position of the fire selector.

3. Semi-Automatic Mode

• In semi-automatic mode, when the trigger is pulled, the hammer is released, striking the firing pin and initiating the firing of a single round.
• After the round is fired, the spent cartridge is ejected, and the action automatically resets, ready for the next shot. The trigger must be released and pulled again to fire the next round.

4. Automatic Mode

• In automatic mode, when the trigger is pulled, the hammer continuously strikes the firing pin for each round in the belt or magazine.
• The action of the weapon automatically cycles with each pull of the trigger, feeding, chambering, firing, and ejecting rounds in rapid succession until the trigger is released or the ammunition runs out.

5. Sear and Disconnector

• The sear is responsible for holding the hammer in the cocked position until the trigger is pulled. In semi-automatic mode, the sear resets after each shot, preventing additional rounds from firing unless the trigger is pulled again.
• The disconnector ensures that the weapon does not fire out of battery (before the bolt is fully locked in place).

6. Safety Mechanism

• The safety mechanism prevents the weapon from firing when the safety selector is set to the “Safe” position. In this position, the sear is blocked, preventing the hammer from being released, regardless of the trigger’s position.

7. Firing Pin

• Once the hammer is released (either in semi or fully automatic mode), it strikes the firing pin. The firing pin then hits the primer of the cartridge, igniting the propellant, which fires the round.

Summary of Trigger Mechanism Steps:

1. Trigger Pull: Pulling the trigger releases the hammer, which strikes the firing pin.
2. Semi-Automatic Mode: One round is fired per pull; the weapon resets after each shot.
3. Automatic Mode: The weapon continuously fires as long as the trigger is held, with the action cycling automatically.
4. Safety: The weapon cannot fire in the “Safe” position, as the sear is blocked.

This trigger mechanism makes the FN M249 a versatile weapon, suitable for both short bursts (semi-automatic) and sustained fire (fully automatic), depending on the needs of the operator.

• FN M249 trigger mechanism
• Buy FN M249 trigger online
• FN M249 trigger parts
• M249 trigger assembly
• Buy FN M249 Trigger Mechanism Online